Example For Configuring The Mac Ping Test - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l

6.35.11 Example for Configuring the MAC Ping Test

Networking Requirements
As shown in
l
l
The NQA MAC Ping test is used to test the connectivity between Switch A and Switch B.
Figure 6-13 Networking diagram for configuring the MAC Ping test
SwitchA
Configuration Roadmap
The configuration roadmap is as follows:
Issue 01 (2012-03-15)
#
interface Vlanif100
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif110
ip address 10.2.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
return
Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 110
#
interface Vlanif110
ip address 10.2.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
nqa-server udpecho 10.2.1.2 9000
#
ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
#
return
Figure 6-13:
CFM is enabled on Switch A and Switch B.
MAs and MDs are configured on Switch A and Switch B.
NQA Client
GE2/0/1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE2/0/1
SwitchB
6 NQA Configuration
404