Rmon And Rmon2 Configuration - Huawei S9300 Configuration Manual

Hide thumbs Also See for S9300:

Table of Contents

S9300&S9300E Terabit Routing Switch

Configuration Guide - Network Management

About This Chapter

This chapter describes how to monitor the Ethernet interface through Remote Network

Monitoring (RMON) and Remote Network Monitoring Version 2 (RMON2).

8.1 Introduction to RMON and RMON2

This part describes working principles of and differences between RMON and RMON2.

8.2 RMON and RMON2 Suported by the S9300&S9300E

This part describes the support for RMON and RMON2 on the S9300&S9300E.

8.3 Configuring RMON

This section describes how to monitor the network status and traffic through RMON.

8.4 Configuring RMON2

This section describes how to configure RMON2 to monitor the traffic of a certain interface,

analyze the source and destination of data transmitted through the interface, and collect the

statistics on the data of each host that passes through the interface.

8.5 Maintaining RMON and RMON2

When an RMON operation fault occurs, you can run the debuggingcommand in the user view

to locate the fault and analyze its cause.

8.6 Configuration Examples

This section provides several configuration examples of RMON and RMON2.

Issue 01 (2012-03-15)

RMON and RMON2 Configuration

Huawei Proprietary and Confidential

8 RMON and RMON2 Configuration