S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Issue 01 (2012-03-15)
[SwitchA] display eth-trunk 1
Eth-Trunk1's state information is:
WorkingMode: NORMAL
DIP
Least Active-linknumber: 1
8
Operate status: up
3
-------------------------------------------------------------------------------
-
PortName
Weight
GigabitEthernet1/0/1
1
GigabitEthernet1/0/2
GigabitEthernet1/0/3
# View the LLDP configurations.
[SwitchA] display lldp local
System information
--------------------------------------------------------------------------
Chassis
type
:macAddress
Chassis ID
:00e0-
fc33-0011
System name
:SwitchA
System description
:Quidway
Huawei Versatile Routing Platform
Software
VRP (R) Software, Version 5.110 (S9300 V200R001C00)
Copyright (c) 2000-2011 Huawei Technologies Co.,
Ltd
System capabilities
supported
:bridge
System capabilities
enabled
:bridge
LLDP Up time
:2011/4/13
18:35:45
MED system information
--------------------------------------------------------------------------
Device class
:Network Connectivity
(MED inventory information of master board)
HardwareRev
:LE02SRUB VER.B
FirmwareRev
:NA
SoftwareRev
:Version 5.110 V200R001C00
SerialNum
:NA
Manufacturer name :HUAWEI TECH CO.,LTD
Model name
:NA
Asset tracking identifier :NA
System configuration
--------------------------------------------------------------------------
LLDP Status
LLDP Message Tx Interval
LLDP Message Tx Hold Multiplier :4
LLDP Refresh Delay
LLDP Tx Delay
LLDP Notification Interval
LLDP Notification Enable
Management Address
Remote Table Statistics:
--------------------------------------------------------------------------
Remote Table Last Change Time
Remote Neighbors Added
Remote Neighbors Deleted
Remote Neighbors Dropped
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Hash arithmetic: According to SIP-XOR-
Max Bandwidth-affected-linknumber:
Number Of Up Port In Trunk:
Status
Up
Up
1
Up
1
:enabled
:30
:2
:2
:5
:enabled
:IP: 10.10.10.1
:0 days, 15 hours, 1 minutes, 21 seconds
:1
:0
:0
2 LLDP Configuration
(default is disabled)
(default is 30s)
(default is 4)
(default is 2s)
(default is 2s)
(default is 5s)
(default is disabled)
73