Huawei S9300 Configuration Manual page 110

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
<Quidway> display ndp interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
If the NTDP neighbor is normally established, you can run the display ntdp command to check
the NTDP settings.
<Quidway> display ntdp
Network topology discovery protocol is enabled
Hops
Timer
Hop Delay : 200 ms
Port Delay: 20 ms
Total time for last collection: 462ms
If device information is successfully collected through NTDP, you can run the display ntdp
device-list [ verbose ] command to view information lists of all the devices.
<Quidway> display ntdp device-list
The device-list of NTDP:
------------------------------------------------------------------------------
MAC
------------------------------------------------------------------------------
0004-0004-0004
0003-0003-0003
0002-0002-0002
0001-0001-0001
If the cluster is established successfully, you can run the display cluster command to view
information about the HGMP cluster to which the device belongs, such as the cluster name and
ID of the management VLAN.
<HUAWEI_0.Quidway> display cluster
Cluster name:"HUAWEI"
Role:Administrator switch
Management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 second(s)
Handshake hold-time:60 second(s)
IP pool:10.1.1.1/24
No logging host configured
No SNMP host configured
No FTP server configured
No SFTP server configured
cluster-member ftp-timeout: 300 second(s)(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 2 member(s) in the cluster, and 0 of them are down.
If the cluster is established successfully, you can run the display cluster candidates command
to view information about candidate switches, such as the MAC address and device type.
<HUAWEI_0.Quidway> display cluster candidates
MAC
0004-0004-0004
0003-0003-0003
0002-0002-0002
Issue 01 (2012-03-15)
Status: Enabled, Packets Sent: 116, Packets Received: 110, Packets Error: 0
Neighbor 1: Aging Time: 174(s)
MAC Address : 0018-8203-39d8
Port Name : GigabitEthernet1/0/1
Software Version: VRP 5.110 V200R001C00
Device Name : S9300
Port Duplex : FULL
Product Ver : S9300
: 3
: 10 min
HOP IP
2 10.0.0.4/8
1 10.0.0.3/8
1 10.0.0.2/8
0 10.0.0.1/8
: 10
: disabled
HOP IP
2 10.0.0.4/8
1 10.0.0.3/8
1 10.0.0.2/8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PLATFORM
S9300
S9300
S9300
S9300
PLATFORM
S9300
S9300
S9300
3 HGMP Configuration
95