Example For Configuring A Device To Communicate With An Nm Station By Using Snmpv3 - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
#
snmp-agent
snmp-agent local-engineid 000007DB7FFFFFFF00001AA7
snmp-agent community write adminnms2 mib-view allexthgmp acl 2001
snmp-agent sys-info contact call Operator at 010-12345678
snmp-agent sys-info version v2c v3
snmp-agent target-host inform address udp-domain 1.1.1.2 params securityname
1.1.2.1 v2c
snmp-agent mib-view included allexthgmp iso
snmp-agent mib-view excluded allexthgmp hwCluster
snmp-agent notification-log enable
snmp-agent notification-log global-ageout 12
snmp-agent trap enable
#
return
1.5.3 Example for Configuring a Device to Communicate with an
NM Station by Using SNMPv3
This section provides an example to describe how to configure a device to communicate with
an NM station by using SNMPv3 and how to specify the MIB objects that can be managed by
the NM station.
Networking Requirements
As shown in
across a public network. According to the network planning, NMS2 can manage every MIB
object except HGMP on the switch, and NMS1 does not manage the switch.
On the switch, only the modules that are enabled by default are allowed to send alarms to NMS2.
This prevents an excess of unwanted alarms from being sent to NMS2. Excessive alarms can
make faults location difficult.
The data transmitted between NMS2 and the switch needs to be encrypted and the NMS
administrator needs to be authenticated because the data has to travel across the public network.
Equipment administrator's contact information needs to be configured on the switch. This allows
the NMS administrator to contact the equipment administrator quickly if a fault occurs.
Figure 1-6 Networking diagram for configuring a device to communicate with an NM station
by using SNMPv3
1.1.1.1/24
1.1.1.2/24
Issue 01 (2012-03-15)
Figure 1-6, two NM stations (NMS1 and NMS2) and the switch are connected
NMS1
IP Network
NMS2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/0
VLANIF100
1.1.2.1/24
Switch
1 SNMP Configuration
39