Checking The Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
l To configure a NQA test packets to be sent without searching the routing table, run:
Step 6 Run:
start
An NQA test is started.
Select the start mode as required because the start command has several forms.
l To start the NQA test immediately, run the start now [ end { at [ yyyy/mm/dd ] hh:mm:ss |
l To start the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss [ end
l To start the NQA test after a certain delay, run the start delay { seconds second |
----End

6.10.3 Checking the Configuration

After configuring a traceroute test, you can view the test result.
Prerequisites
The configurations of the traceroute test are complete.
Context
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the statistics about each hop are displayed, it means
that the traceroute test is successful.
<Quidway> display nqa results
NQA entry(t, t) :testflag is inactive ,testtype is trace
1 . Test 1 result
Issue 01 (2012-03-15)
sendpacket passroute
delay { seconds second | hh:mm:ss } | lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started immediately.
{ at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime { seconds
second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
NOTE
NQA test results cannot be displayed automatically on the terminal. You need to run the display nqa
results command to view test results. By the default, the command output contains the records about only
the last five tests.
The test is finished
Completion:success
Disconnect operation number:0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Attempts number:1
Operation timeout number:0
6 NQA Configuration
280