Huawei S9300 Configuration Manual page 161

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
[HUAWEI_0.Administrator-1-cluster] display cluster
Cluster name:"HUAWEI"
Role:Administrator switch
Management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 second(s)
Handshake hold-time:60 second(s)
IP pool:10.0.0.1/8
Logging host:4.0.0.1
SNMP host:3.0.0.1
FTP server:2.0.0.1
SFTP server:2.0.0.2
cluster-member ftp-timeout: 300 second(s)(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : enabled
There are 4 member(s) in the cluster, and 0 of them are down.
Step 10 Verify the configuration.
l After the previous configuration, run the display current-configuration filter snmp
----End
Configuration Files
l
Issue 01 (2012-03-15)
: 10
: disabled
command, you can view that the SNMP agent is enabled, the UDP domain of the
administrator switch is 3.0.0.1, the address of the SNMP host, and the UDP domain of
member switches is 10.0.0.1, the address of the administrator switch. Take the displayed
information about the administrator switch and Member-3 as examples.
[HUAWEI_0.Administrator-1] display current-configuration filter snmp
snmp-agent target-host trap address udp-domain 3.0.0.1 params securityname clus
ter
[HUAWEI_3.Member-3] display current-configuration filter snmp
snmp-agent target-host trap address udp-domain 10.0.0.1 params securityname clu
ster
Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 3
ntdp timer 10
ndp enable
#
interface Vlanif10
ip address 1.0.0.1 255.0.0.0
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface GigabitEthernet1/0/3
port link-type trunk
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 HGMP Configuration
146