Huawei S9300 Configuration Manual page 77

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Issue 01 (2012-03-15)
type :macAddress
Chassis ID :00e0-
fc33-0011
System name :SwitchA
System description :Quidway
Huawei Versatile Routing Platform
Software
VRP (R) Software, Version 5.110 (S9300 V200R001C00)
Copyright (c) 2000-2011 Huawei Technologies Co.,
Ltd
System capabilities
supported :bridge
System capabilities
enabled :bridge
LLDP Up time :2011/2/13
18:31:37
MED system information
--------------------------------------------------------------------------
Device class :Network Connectivity
(MED inventory information of master board)
HardwareRev :LE02SRUB VER.B
FirmwareRev :NA
SoftwareRev :Version 5.110 V200R001C00
SerialNum :NA
Manufacturer name :NA
Model name :NA
Asset tracking identifier :NA
System configuration
--------------------------------------------------------------------------
LLDP Status
LLDP Message Tx Interval
LLDP Message Tx Hold Multiplier :4
LLDP Refresh Delay
LLDP Tx Delay
LLDP Notification Interval
LLDP Notification Enable
Management Address
Remote Table Statistics:
--------------------------------------------------------------------------
Remote Table Last Change Time
Remote Neighbors Added
Remote Neighbors Deleted
Remote Neighbors Dropped
Remote Neighbors Aged
Total Neighbors
Port information:
--------------------------------------------------------------------------
Interface GigabitEthernet1/0/1:
LLDP Enable Status
Total Neighbors
Port ID subtype :interfaceName
Port ID :GigabitEthernet1/0/1
Port description :HUAWEI, Quidway Series, GigabitEthernet1/0/1 Interface
Port And Protocol vlan ID(PPVID) don't supported
Port VLAN ID(PVID) :1
VLAN name of VLAN 1: VLAN1
Protocol identity :STP RSTP/MSTP LACP EthOAM CFM
Auto-negotiation supported
Auto-negotiation enabled
OperMau :speed(1000)/duplex(Full)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
:enabled
:30
:2
:2
:5
:enabled
:IP: 10.10.10.1
:0 days, 0 hours, 0 minutes, 0 seconds
:0
:0
:0
:0
:1
:enabled
:1
:Yes
:Yes
2 LLDP Configuration
(default is disabled)
(default is 30s)
(default is 4)
(default is 2s)
(default is 2s)
(default is 5s)
(default is disabled)
(default is disabled)
62