Ntp Configuration - Huawei S9300 Configuration Manual

Hide thumbs Also See for S9300:

Table of Contents

S9300&S9300E Terabit Routing Switch

Configuration Guide - Network Management

About This Chapter

This chapter describes how to configure Network Time Protocol (NTP) to make clocks of the

devices on the network identical.

4.1 Introduction to NTP

This part describes the application and working principles of NTP.

4.2 NTP Supported by the S9300&S9300E

This part describes NTP operating modes supported by the S9300&S9300E.

4.3 Configuring Basic NTP Functions

This section describes how to configure basic NTP functions, including the NTP operating

4.4 Configuring NTP Security Mechanisms

This section describes how to configure NTP security mechanisms to guarantee reliable clock

synchronization on networks demanding high security.

4.5 Maintaining NTP

This section describes how to reset NTP packets through the resetting commands in case of an

NTP operation fault.

4.6 Configuration Examples

This section provides several configuration examples of NTP.

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

NTP Configuration

4 NTP Configuration