Huawei S9300 Configuration Manual page 149

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
------------------------------------------------------------------------------
0004-0004-0004
0003-0003-0003
0002-0002-0002
0001-0001-0001
Step 5 Create a cluster.
# On the administrator switch, set the range of IP addresses that can be assigned to the cluster
to 10.0.0.0/8, in which the IP address assigned to the administrator switch is 10.0.0.1/8.
[Administrator-1] cluster
[Administrator-1-cluster] ip-pool 10.0.0.1 8
# Create a cluster named HUAWEI on the administrator switch.
[Administrator-1-cluster] build HUAWEI
[HUAWEI_0.Administrator-1-cluster]
After the previous configuration, check information about the cluster to which the device
belongs. You can find that the device name is changed, the cluster name is HUAWEI, and the
management VLAN ID is 10.
[HUAWEI_0.Administrator-1-cluster] display cluster
Cluster name:"HUAWEI"
Role:Administrator switch
Management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 second(s)
Handshake hold-time:60 second(s)
IP pool:10.0.0.1/8
No logging host configured
No SNMP host configured
No FTP server configured
No SFTP server configured
cluster-member ftp-timeout: 300 second(s)(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 1 member(s) in the cluster, and 0 of them are down.
On the administrator switch, check information about candidate switches, you can find all the
candidate switches and their types.
[HUAWEI_0.Administrator-1-cluster] display cluster candidates
[HUAWEI_0.Administrator-1-cluster] display cluster candidates
MAC
0004-0004-0004
0003-0003-0003
0002-0002-0002
Step 6 Add member switches.
# Add all candidate switches to the cluster.
[HUAWEI_0.Administrator-1-cluster] auto-build
Collecting candidate list, please wait...
Issue 01 (2012-03-15)
2 10.0.0.4/8
1 10.0.0.3/8
1 10.0.0.2/8
0 10.0.0.1/8
NOTE
Following steps can be performed only on the administrator switch.
: 10
: disabled
HOP IP
2 10.0.0.4/8
1 10.0.0.3/8
1 10.0.0.2/8
NOTE
l Following steps can be performed only on the administrator switch.
l Take the mode of automatically adding member switches as an example. To add member switches
manually, see Adding a Member
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
S9300
S9300
S9300
S9300
PLATFORM
S9300
S9300
S9300
Switch.
3 HGMP Configuration
134