Huawei S9300 Configuration Manual page 144

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
Networking Requirements
As shown in
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
To upload files to Member-1, Member-2, and Member-3 or download files from them, you can
set up an FTP connection between devices out of the cluster and member switches in NAT or
non-NAT mode.
Figure 3-5 Networking diagram of configuring the interconnection of FTP servers and devices
in and out of the HGMP cluster (in non-NAT mode)
SFTP Server
Device
Administrator-1
Member-2
Issue 01 (2012-03-15)
Figure 3-5, all the Layer 2 switches belong to the same cluster. Administrator-1 is
NOTE
In this configuration example where the Non-NAT mode is adopted, Member-3 accesses the FTP server
(2.0.0.1/8) out of the cluster and devices out of the cluster access the FTP server (Member-2) in the cluster.
FTP Server
2.0.0.1/8
2.0.0.2/8
GE1/0/1
1.0.0.2/8
GE1/0/1
GE1/0/1
Member-1
GE1/0/2
GE1/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
GE1/0/3
GE1/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE1/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
129