Huawei S9300 Configuration Manual page 420

S9300&S9300E Terabit Routing Switch
Configuration Guide - Network Management
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Configure the MA and MD between Switch A and Switch B.
<SwitchA> system-view
[SwitchA] cfm enable
[SwitchA] cfm md test
[SwitchA-md-test] ma test
[SwitchA-md-test-ma-test] map vlan 11
[SwitchA-md-test-ma-test] mep mep-id 11 interface GigabitEthernet2/0/1 outward
[SwitchA-md-test-ma-test] remote-mep mep-id 12 mac 00e0-fc88-aaaa
[SwitchA-md-test-ma-test] quit
[SwitchA-md-test] quit
[SwitchA]
[Quidway]system-view
[SwitchB] cfm enable
[SwitchB] cfm md test
[SwitchB-md-test] ma test
[SwitchB-md-test-ma-test] map vlan 11
[SwitchB-md-test-ma-test] mep mep-id 12 interface GigabitEthernet2/0/1 outward
[SwitchB-md-test-ma-test] remote-mep mep-id 11 mac 0000-0000-0010
[SwitchB-md-test-ma-test] quit
[SwitchB-md-test] quit
[SwitchB]
Step 2 # Enable the NQA client and create a MAC Ping test for a common tunnel on Switch A.
[SwitchA]nqa test-instance admin macping
[SwitchA-nqa-admin-macping]test-type macping
[SwitchA-nqa-admin-macping]md test ma test
[SwitchA-nqa-admin-macping]destination-address mac 00e0-fc88-aaaa
Step 3 Perform the test.
[SwitchA-nqa-admin-macping] start now
Step 4 Verify the test result.
[SwitchA-nqa-admin-macping] display nqa results test-instance admin macping
NQA entry(admin, macping) :testFlag is inactive ,testtype is macping
1 . Test 1 result
Issue 01 (2012-03-15)
Configure Switch A as the NQA client.
Configure Switch B as the NQA server.
Create a MAC Ping test on Switch A.
IP address and mask of the NQA server
The test is finished
SendProbe:3
Completion:success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/1/1/1
NumOfRTT:3
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:0
Max Positive SD:0
Positive SD Number:0
Positive SD Sum:0
Positive SD Square Sum :0
Min Negative SD:0
Max Negative SD:0
Negative SD Number:0
Negative SD Sum:0
Negative SD Square Sum :0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:3
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:3
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:0
Max Positive DS:0
Positive DS Number:0
Positive DS Sum:0
Positive DS Square Sum :0
Min Negative DS:0
Max Negative DS:0
Negative DS Number:0
Negative DS Sum:0
Negative DS Square Sum :0
6 NQA Configuration
405