Configuring Backup Group-Related Parameters - Huawei Quidway S3900 Series Operation Manual

Operation Manual – VRRP
Quidway S3900 Series Ethernet Switches-Release 1510
Operation
Create a VLAN
Quit to system view
Enter
interface view
Configure a virtual
router IP address

1.2.3 Configuring Backup Group-Related Parameters

Table 1-4 lists the operations to configure a switch in a backup group.
Table 1-4 Configure backup group-related parameters
Operation
Enter system view
Create a VLAN
Quit to system view
Enter
interface view
Configure
priority
backup group
Configure
preemptive
and delay period
for the
group
Configure
authentication type
and authentication
key
Configure
VRRP timer
Command
vlan vlan-id
quit
VLAN interface
vlan-id
vrrp vrid
virtual-ip virtual-address
Command
system-view
vlan vlan-id
quit
VLAN interface
valn-id
the
vrrp vrid
of the
priority priority
the
mode vrrp vrid
preempt-mode
backup delay delay-value ]
the
vrrp authentication-mode
authentication-type
authentication-key
vrrp vrid
the
timer
adver-interval
Huawei Technologies Proprietary
—
This operation creates the
VLAN to which the backup
group
vlan-id argument is the ID of
the VLAN.
—
vlan-interface
—
Optional
virtual-router-id
—
—
—
vlan-interface
—
Optional
virtual-router-id
By default, the priority of a
backup group is 100.
Optional
virtual-router-id
By default, a backup group
[ timer
operates in the preemptive
mode.
Optional
By default, a backup group
does not authenticate.
Optional
virtual-router-id
By default, the interval for the
advertise
master switch in a backup
group to send VRRP packets
is 1 second.
1-8
Chapter 1 VRRP Configuration
Description
corresponds.
Description
The