Configuring Universal Nqa Test Parameters; Establishing The Configuration Task; Configuring Universal Parameters For The Nqa Test Instance - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management

6.23 Configuring Universal NQA Test Parameters

This section describes how to set and use universal parameters for NQA test instances.

6.23.1 Establishing the Configuration Task

Before setting universal parameters for NQA test instances, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
Applicable Environment
NQA supports not only the configuration of the parameters for various types of tests, but also
the configuration of universal options of a test group.
Commonly, the default configurations of the universal parameters are adopted.
Pre-configuration Tasks
Before configuring universal NQA parameters, create NQA tests correctly.

6.23.2 Configuring Universal Parameters for the NQA Test Instance

This part describes the application of each parameter in the NQA test instance.
Context
Do as follows on the NQA client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa test-instance admin-name test-name
The NQA test instance view is displayed.
Step 3 Perform the following as required to configure universal parameters:
l Run:
l Run:
Issue 01 (2011-10-26)
Min/Max/Average Completion Time: 7/9/8
Sum/Square-Sum Completion Time: 24/194
RTD OverThresholds number: 0
Last Good Probe Time: 2009-2-28 10:58:35.5
Destination ip address:12.14.21.12
Lost packet ratio: 0 %
agetime hh:mm:ss
The aging time is set for the NQA test instance.
datafill fillstring
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
320