Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
1.3.3 Configuring Login User Parameters
This part describes how to configure user parameters for login to the switch through Telnet.
Context
Do as follows on the switch:
Procedure
Step 1 Configure the authentication mode of login users.
Step 2 Configure the authority limitation of login user.
For details, see
Management.
----End
1.3.4 Logging In from the Telnet Client
This part describes how to log in to the switch through Telnet.
Context
Do as follows on the PC:
Procedure
Step 1 Run the Telnet program on the PC that functions as a client, and enter the IP address of the
interface on the destination switch that provides the Telnet service.
Step 2 Enter the user name and password in the login window. After authentication, a command line
prompt such as <Quidway> appears. Now enter the configuration environment in the user view.
----End
1.4 Configuration Examples
This section provides examples for configuring users to log in to the switch through the console
port or Telnet together with the configuration flowchart. The configuration examples explain
networking requirements, configuration notes, and configuration roadmap.
1.4.1 Example for Logging In Through the Console Port
In this example, you can configure the PC so as to log in to the switch through the console port.
Networking Requirements
Initialize the configuration of the switch when the switch is powered on for the first time.
Issue 01 (2011-07-15)
5.4 Configuring VTY User Interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Logging In to Switch
and
5.6 Configuring User
6