11
STATus Subsystem
Questionable Register Sets
The questionable register sets contain information which gives an indication of the
quality of the data produced by the power meter. The contents of the individual
registers in these register sets may be accessed by appending the commands
listed in
The following command descriptions detail the SCPI register you require to
control but do not detail the register set commands.
The three questionable register sets are:
STATus:QUEStionable
STATus:QUEStionable:CALibration[:SUMMary]
STATus:QUEStionable:POWer[:SUMMary]
484
Status Register Set
Commands.
N1911A/1912A P-Series Power Meters Programming Guide