[Sense[1]]|Sense2:V2P Atype|Dtype - Keysight N1911A Programming Manual

P-series power meters

Hide thumbs Also See for N1911A:

Table of Contents

SENSe Subsystem

[SENSe[1]]|SENSe2:V2P ATYPe|DTYPe

This command is used to select the type of linearity correction that is applied to

the channel sensors being used. For most 8480 Series sensors, the correct (A type

or D type) linearity correction table is automatically selected. However, for the

V8486A and W8486A sensors, D type (diode) correction is selected and the

automatic selection must be overridden.

This command is only applicable for V8486A and W8486A sensors.

SENS2:V2P DTYP

Reset Condition

On reset, the linearity correction is set for A type.

[SENSe[1]]|SENSe2:V2P?

The query returns the current type of linearity correction being displayed on the

N1911A/1912A P-Series Power Meters Programming Guide

This command selects the D type linearity

correction to be applied to Channel B.

Table of Contents