10
SENSe Subsystem
Query
[SENSe[1]]|SENSe2:CORRection:GAIN2:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the channel
offsets.
– 1 is returned if a channel offset is enabled
– 0 is returned if a channel offset is disabled
Query Example
CORR:GAIN2:STAT?
Error Messages
If [SENSe[1]]|SENSe2:CORRection:GAIN2:STATe is set to ON while
[SENSe[1]]|SENSe2:SPEed is set to 200, the error –221, "Settings Conflict"
occurs.
410
This command queries whether or not there
is a channel offset applied to Channel A.
N1911A/1912A P-Series Power Meters Programming Guide