Status:questionable - Keysight N1911A Programming Manual

STATus:QUEStionable

The questionable register set contains bits that indicate the quality of various
aspects of signals processed by the power meter.
The following bits in these registers are used by the power meter:
Bit Number Decimal Weight
0 to 2 -
3 8
4 to 7 -
8 256
9 512
10 to 15 -
Bit 3 is set by the logical OR outputs of the
STATus:QUEStionable:POWer:SUMMary register set.
Bit 8 is set by the logical OR outputs of the
STATus:QUEStionable:CALibration:SUMMary register set.
Bit 9 is set if power-on self-test fails, and cleared if it passes.
Syntax
N1911A/1912A P-Series Power Meters Programming Guide
Definition
Not used
POWer Summary
Not used
CALibration Summary
Power On Self Test
Not Used (bit 15 always 0)
:QUES
STAT
STATus Subsystem 11
485