[Sense[1]]|Sense2:Sweep[1]|2|3|4:Auto:ref1|Ref2 <Numeric_Value - Keysight N1911A Programming Manual

[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:AUTO:REF1|REF2
<numeric_value>
This command is used to set the Reference 1 and 2 of the selected gate for Auto
Gating Marker.
This command is only applicable when N192x or E932x sensor is present and
NOTE
trigger acquisition mode is selected.
Syntax
SENS
1
SENS2
Parameters
Item
numeric_value
N1911A/1912A P-Series Power Meters Programming Guide
:
SWE
1
2
3
4
Description/Defaul t
The values of Auto Gating Marker References 1 and 2 for the
selected gate.
The combined value of REF1 and REF2 can not exceed 99.9 %.
:AUTO
:REF1
:REF2
SENSe Subsystem
Space
numeric_value
?
Range of Values
0.0 to 99.9
10
437