[Sense[1]]|Sense2:Temperature - Keysight N1911A Programming Manual

10 SENSe Subsystem

[SENSe[1]]|SENSe2:TEMPerature?

This this command to returns the P-Series power sensor's temperature in degrees
Celsius.
Syntax
Parameters
Item
numeric_value
Example
SENS2:TEMP?
Reset Condition
On reset, this parameter is not affected.
Error Messages
– If a P-Series sensor is not connected, error –241, "Hardware missing" occurs.
444
:
SENS
1
SENS2
Description/Defaul t
A numeric value defining sensor's temperature in degrees
Celsius.
N1911A/1912A P-Series Power Meters Programming Guide
TEMP
?
This command returns the current sensor
temperature found on Channel B.
Range of Values
–50 to 100