Trigger[:Sequence]:Delay <Numeric_Value - Keysight N1911A Programming Manual

14 TRIGger Subsystem
TRIGger[:SEQuence]:DELay <numeric_value>
This command sets the delay between the recognition of a trigger event and the
start of a measurement.
Syntax
Parameters
Item
numeric_value
Trigger delay is not applicable when the power meter is set to power sweep
NOTE
mode or frequency sweep mode.
660
TRIG :SEQ
Description/Defaul t
The delay between the recognition of a trigger event and
the start of the measurement.
– DEF: the default value is 0 seconds
Units are resolved to 1.25 ns.
Space
:DEL
N1911A/1912A P-Series Power Meters Programming Guide
numeric_value
DEF
?
Range of Values
–1 to 1 second
DEF