Figure 3-1 Measurement Display Calculate Block Window; Calculate Subsystem - Keysight N1911A Programming Manual

3

CALCulate Subsystem

CALCulate Subsystem
The CALCulate subsystem performs post acquisition data processing. Functions in
the SENSe subsystem are related to data acquisition, while the CALCulate
subsystem operates on the data acquired by a SENSe function.
There are four independent CALCulate blocks in the power meter: two for each
window, as shown in
determines which CALCulate block is used and where the measurement result is
displayed.
Figure 3-1
Data from both SENSe blocks may feed any or all of the CALCulate blocks via the
MATH command.
CALCulate block.
176
Figure 3-1. The numeric suffix of the CALCulate command
CALC1
upper window/upper measurement
CALC3
upper window/lower measurement
CALC2
lower window/upper measurement
CALC4
lower window/lower measurement
Measurement Display CALCulate Block Window
Figure 3-1 details where the commands are applied with in the
N1911A/1912A P-Series Power Meters Programming Guide