Service:sensor:cable:option <Numeric_Value - Keysight N1911A Programming Manual

SERVice:SENSor:CABLe:OPTion <numeric_value>
This command selects the sensor short cable option or long cable option.
Syntax
SERV
Parameters
Item
Numeric_value
Example
SERV:SENS:CABL:OPT 1
Reset Condition
On power up, the default setting is set to the short cable option. The selected
sensor cable option is not affected by SYST:PRES DEFault or *RST.
Query
SERV:SENS:CABL:OPT?
The query returns the selected sensor cable option.
N1911A/1912A P-Series Power Meters Programming Guide
:SENS :CABL
Description/Defaul t
A numeric value to indicate short or long cable options:
– 0: Sensor cable length ≤ 10 m (short cable)
– 1: Sensor cable length ≥ 10 m (long cable)
Space
:OPT
This command selects the long cable option.
SERVice Subsystem
numeric_value
?
Range of Values
0 to 1
15
703