Pstatistic[1]|2:Ccdf:count <Numeric_Value - Keysight N1911A Programming Manual

PSTatistic[1]|2:CCDF:COUNt <numeric_value>
This command is used to set CCDF cummulative counts for Channel A or Channel
B. The increment step for the cummulative counts is 100 M.
This command is only applicable when P-Series sensor is present and free-run
NOTE
acquisition mode is selected. If P-Series sensor is used by the adjacent channel
in a dual channel setup, the same setting will be applied for free-run acquisition
mode.
Syntax
Parameters
Item
numeric_value
Example
PST1:CCDF:COUN 1.2G
N1911A/1912A P-Series Power Meters Programming Guide
PST
1 :CCDF
2
Description/Defaul t
The CCDF cummulative counts in numeric value.
– Minimum value: 100 M
– Maximum value: 10 G
Space
:COUN
This command sets the CCDF cummulative
counts for Channel A to 1.2 G.
PSTatistic Subsystem
numeric_value
?
Range of Values
100 M to 10 G
9
341