Display:enable <Boolean - Keysight N1911A Programming Manual

DISPlay:ENABle <boolean>
This command is used to enable and disable the display. At power-up the display
is always enabled.
Syntax
DISP
Example
DISP:ENAB 0
Reset Condition
On reset, the display is enabled.
Query
DISPlay:ENABle?
The query returns a 1 or 0 into the output buffer.
– 1 is returned when the display is enabled
– 0 is returned when the display is disabled
Query Example
DISP:ENAB?
N1911A/1912A P-Series Power Meters Programming Guide
Space
:ENAB
0|OFF
1|ON
?
This command disables the display.
This command queries whether the display is
on or off.
DISPlay Subsystem 5
231