PSTatistic[1]|2:CCDF:STORe:REFerence
This command is used to store Channel A or Channel B as a reference trace for
CCDF graph window.
The trace will be saved as reference trace in volatile RAM.
NOTE
This command is only applicable when P-Series sensors are present and the
NOTE
following conditions are met:
– Free-run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
– Expanded window is enabled (not full CCDF screen window)
Syntax
Example
PST:CCDF:STOR:REF
PST2:CCDF:STOR:REF
N1911A/1912A P-Series Power Meters Programming Guide
1
PST
:CCDF
2
:REF
:STOR
This command saves the Channel A trace as
reference trace.
This command saves the Channel B trace as
reference trace.
PSTatistic Subsystem
9
351