Format[:Readings][:Data] <Character_Data - Keysight N1911A Programming Manual

FORMat[:READings][:DATA] <character_data>
This command sets the data format for transferring numeric information to either
ASCii or REAL:
– When the format type is ASCii, numeric data is output as ASCII bytes in the
– When the format type is REAL, numeric data is output as IEEE 754 64 bit
For the N1912A power meter the same FORMat is used on both channels.
FORMat data formatting is not affected by TRACe subsystem data formatting.
NOTE
Syntax
FORM
Parameters
Item
character_data
N1911A/1912A P-Series Power Meters Programming Guide
<NR3> format.
floating point numbers in a definite length block. The result is an 8 byte block
per number. Each complete block is terminated by a line feed character.
:READ
Description/Defaul t
Data format for transferring data:
– ASCii
– REAL
Space
:DATA
FORMat Subsystem
character_data
?
Range of Values
ASCii
REAL
6
265