[Sense[1]]|Sense2:Sweep[1]|2|3|4:Time <Numeric_Value - Keysight N1911A Programming Manual

10 SENSe Subsystem
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:TIME <numeric_value>
This command sets the length of the time-gated period (time-gate length) for
time-gated measurements for the P-Series and E9320 sensors which are set to
NORMal mode. To set an E9320 sensor to NORMal mode, refer to the command
"[SENSe[1]]|SENSe2:DETector:FUNCtion <character_data>"
Syntax
Parameters
Item
numeric_value
442
:
SENS
1
SENS2
Description/Defaul t
The length of the time gated period in seconds.
– : the default value is 100 µs
DEF
Units are resolved to 1 ns.
SWE 1
2
3
4
N1911A/1912A P-Series Power Meters Programming Guide
on page 414.
: TIME Space
numeric_value
Range of Values
0 to 1 second
DEF
DEF
?