Pstatistic:ccdf:reference:power:average - Keysight N1911A Programming Manual

9 PSTatistic Subsystem

PSTatistic:CCDF:REFerence:POWer:AVERage?

This command is used to retrieve average power data of the saved reference
trace.
This command is only applicable when P-Series sensors are present and the
NOTE
following conditions are met:
– Free-run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
Syntax
Example
PST:CCDF:REF:POW:AVER?
Error Messages
– If command is executed in other window besides CCDF window, error –221
– If there was no previously saved trace, error –221 "Settings conflict: No
336
PST :CCDF
"Settings conflict: Requires CCDF window" occurs.
reference trace saved" occurs. Please check the status of saved reference trace
using command PST:CCDF:STOR:REF?.
:POW
:REF
This command returns the average power
value of the reference trace.
N1911A/1912A P-Series Power Meters Programming Guide
?
:AVER