Keysight N1911A Programming Manual page 253

Example
DISP:WIND2:RES 4
Reset Condition
On reset, the resolution is set to 3.
Query
DISPlay[:WINDow[1]|2]:RESolution? [MIN|MAX]
The query returns the current setting of the window's resolution or the value
associated with MIN and MAX. The format of the response is <NR1>.
Query Example
DISP:WINDow1:NUMber2RES?
N1911A/1912A P-Series Power Meters Programming Guide
This command sets the lower window's
resolution to four significant digits if the
measurement result is linear, or to 0.001 if
the measurement result is logarithmic.
This command queries the resolution setting
of the upper window/lower measurement.
DISPlay Subsystem 5
253