Syntax
Parameters
Type
NRf
non-decimal numeric
Query
:NTRansition?
The query returns a 15 bit decimal-weighted number representing the contents of
the Negative Transition Register of the SCPI register set being queried. The format
of the return is <NR1> in the range of 0 to 32767 (2
:PTRansition <NRf>|<non-decimal numeric>
This command is used to set the Positive Transition Register of the SCPI Register
Set you require to control. The first 15 bits of the input parameter are written into
the Positive Transition Register of the SCPI Register Set concerned. The last bit
(bit 15) is always set to 0.
N1911A/1912A P-Series Power Meters Programming Guide
space
:NTR
Description
The value used to set the NTR Register.
NRf
non-decimal numeric
?
15
STATus Subsystem
Range of Values
16
0 to 2
–1
–1).
11
471