[Sense[1]]|Sense2:Average2:Count <Numeric_Value - Keysight N1911A Programming Manual

[SENSe[1]]|SENSe2:AVERage2:COUNt <numeric_value>
This command is used to enter the video filter length for the P-Series and E9320
sensor. Video filtering is applied to the traces. Successive traces are combined to
reduce noise without affecting the dynamic characteristic of the signal.
Syntax
SENS
SENS2
Parameters
Item
numeric_value
[a] This is only implemented in powers of 2 (2
Example
AVER2:COUN 16
N1911A/1912A P-Series Power Meters Programming Guide
:
1 AVER2
Description/Defaul t
A numeric value defining the filter length.
– : the default value is 4.
DEF
n
).
Space
:COUN
?
This command enters a video filter length of
16 for Channel A.
SENSe Subsystem
numeric_value
DEF
Range of Values
[a]
1 to 256
DEF
10
381