Pstatistic[1]|2:Ccdf:power? <Numeric_Value - Keysight N1911A Programming Manual

PSTatistic[1]|2:CCDF:POWer? <numeric_value>
This command is used to return the power level at the specified probability.
This command is only applicable when P-Series sensors are present and the
NOTE
following conditions are met:
– Free run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
Syntax
Parameters
Item
numeric_value
Example
PST1:CCDF:POW? 30
N1911A/1912A P-Series Power Meters Programming Guide
1
PST
2
Description/Defaul t
The probability at the queried power.
– Maximum value: 0 %
– Minimum value: 100 %
:POW
:CCDF
This command queries the power level at
probability of 30 %.
PSTatistic Subsystem
?
space
numeric_value
Range of Values
0.0 to 100
9
347