Display[:Window[1]|2]:Format <Character_Data - Keysight N1911A Programming Manual

5 DISPlay Subsystem
DISPlay[:WINDow[1]|2]:FORMat <character_data>
This command selects the format of the selected window.
Syntax
– This command has the same purpose as DISPlay[:WINDow[1]|2]:
NOTE
– This command does not allow the setting set to TRACe when either
242
DISP
:WIND
ANALog:LOWer <numeric_value>.
measurement channel (for dual channel) is configured to initiate external
trigger buffering.
1 :FORM
2
N1911A/1912A P-Series Power Meters Programming Guide
Space
character_data
?