Equipment Operation - Keysight N1911A Programming Manual

Equipment Operation

Warnings and Cautions
This guide uses warnings and cautions to denote hazards.
– A WARNING notice denotes a hazard. It calls attention to an operating
WARNING
– A CAUTION notice denotes a hazard. It calls attention to an operating
CAUTION
Personal Safety Considerations
This is a Safety Class I product (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall only be inserted in a socket
outlet provided with a protective earth contact. Any interruption of the protective
conductor, inside or outside the instrument, is likely to make the instrument
dangerous. Intentional interruption is prohibited. If this instrument is not used as
specified, the protection provided by the equipment could be impaired. This
instrument must be used in a normal condition (in which all means of protection
are intact) only.
No operator serviceable parts inside. Refer servicing to qualified personnel. To
prevent electrical shock, do not remove covers. For continued protection against
fire hazard, replace the line fuse(s) only with fuses of the same type and rating (for
example, normal blow, time delay, etc.). The use of other fuses or material is
prohibited.
4
procedure, practice, or the like that, if not correctly performed or adhered
to, could result in personal injury or loss of life. Do not proceed beyond a
WARNING notice until the indicated conditions are fully understood and
met.
procedure, practice, or the like that, if not correctly performed or adhered
to, could result in damage to the product or loss of important data. Do
not proceed beyond a CAUTION notice until the indicated conditions are
fully understood and met.
N1911A/1912A P-Series Power Meters Programming Guide