[Sense[1]]|Sense2:Sweep[1]|2|3|4:Offset:time <Numeric_Value - Keysight N1911A Programming Manual

10 SENSe Subsystem
[SENSe[1]]|SENSe2:SWEep[1]|2|3|4:OFFSet:TIME <numeric_value>
This command sets the delay between the delayed trigger point and the start of
the time-gated period (the offset time) for a P-Series sensor or a E9320 sensors
set to NORMal mode. To set an E9320 sensor to NORMal mode, refer to the
command
page 414.
Syntax
SENS
SENS2
Parameters
Item
numeric_value
440
"[SENSe[1]]|SENSe2:DETector:FUNCtion <character_data>"
:
1 SWE
Description/Defaul t
The delay between the trigger point and the start of the
time-gated period.
– : the default value is 0 seconds
DEF
Units are resolved to 1 ns.
N1911A/1912A P-Series Power Meters Programming Guide
:OFFS
:TIME
1
2
3
4
on
Space
numeric_value
DEF
?
Range of Values
–1 to 1 second
DEF