Keysight N1911A Programming Manual page 673

Parameters
Item
numeric_value
Example
TRIG:SEQ1:COUN 10
Reset Condition
On reset, the value is set to 1.
Query
TRIGger[1]|2[:SEQuence[1]|2]:COUNt?
The query returns the current setting of trigger events for a specified channel.
Query Example
TRIG:SEQ2:COUN?
Error Messages
If COUNt >1 when [SENSe[1]]|SENSe2:MRATe <character_data> is set to
NORMal or DOUBle, error –221, "Settings Conflict" occurs.
N1911A/1912A P-Series Power Meters Programming Guide
Description/Defaul t
The number of triggered events for the measurement cycle.
– DEF: the default value is 1
Range of Values
1 to 50
DEF
This command sets the number of triggered
events to 10 for the Channel A measurement
cycle.
This command queries the number of
triggered events for the Channel B
measurement cycle.
TRIGger Subsystem 14
673