Trace[1]|2:Define:duration:reference<Numeric_Value - Keysight N1911A Programming Manual

13 TRACe Subsystem
TRACe[1]|2:DEFine:DURation:REFerence<numeric_value>
This command defines the reference levels to be used in the calculation of pulse
durations. This allows pulse duration measurements between non-standard
reference levels. This is a configuration command independent of the sensors.
Syntax
Parameters
Item Description/Defaul t
numeric_value Reference levels to be used in calculation of pulse duration
Example
TRAC1:DEF:DUR:REF 25
TRAC1:DEF:DUR:REF DEF
616
TRAC
1
2
N1911A/1912A P-Series Power Meters Programming Guide
:DUR :REF
:DEF
This command sets trace 1 pulse duration
measurements to look for the 25 % reference
levels.
This command sets trace 1 pulse duration
measurements to look for the 50 % reference
levels.
Space
numeric_value
?
Range of Values
0 to 100
DEF