Rcl <Nrf - Keysight N1911A Programming Manual

17 IEEE 488.2 Command Reference
*RCL <NRf>
The *RCL <NRf> (ReCaLl) command restores the state of the power meter from
the specified save/recall register. An instrument setup must have been stored
previously in the specified register.
Syntax
Parameters
Type Description/Defaul t
NRf The number of the register to be recalled.
Error Message
– If the register does not contain a saved state, error –221, "Settings conflict"
744
Space
*RCL
occurs.
NRf
N1911A/1912A P-Series Power Meters Programming Guide
Range of Values
1 - 10