Keysight N1911A Programming Manual page 663

Example
TRIG:SEQ1:HOLD 0.1
Reset Condition
On reset the trigger holdoff is set to 1 µs.
Query
TRIGger[:SEQuence]:HOLDoff?
The query returns the current trigger holdoff setting.
Query Example
TRIG:SEQ:HOLD?
N1911A/1912A P-Series Power Meters Programming Guide
This command sets the trigger holdoff to 100
ms for Channel A.
This command queries the trigger holdoff
setting for Channel A.
TRIGger Subsystem 14
663