Keysight N1911A Programming Manual page 422

10 SENSe Subsystem
This command is only applicable when used with E4410, N8480 (excluding
NOTE
Option CFT), E9300, E9320 or N1920 sensor.
SENS:FREQ:STAR, SENS:FREQ:STOP and SENS:FREQ:STEP are allowed to be set in
NOTE
any desirable sequence.
Frequency step size calculated will be rounded to the nearest kHz with the
minimum size of 1 kHz. When frequency range is less than frequency sweep
step, the remaining steps will be repeated with the last frequency point.
Syntax
SENS
1
SENS2
Parameters
Item
numeric_value
422
:
:CW
FREQ
Description
A numeric value for number of step in the average trigger
frequency sweep:
– : the default value is 0
DEF
– : 0
MIN
– : 2048
MAX
N1911A/1912A P-Series Power Meters Programming Guide
:STEP
:FIX
Space
numeric_value
DEF
MIN
MAX
Space
?
Range of Values
0 to 2048
DEF
MIN
MAX
MIN
MAX