[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut][:MAGNit
ude]?
This command is used to return the frequency dependent offset currently being
applied.
Syntax
SENS
SENS2
Example
CORR:GAIN4?
Reset Condition
On reset, the frequency dependent offset is not affected.
N1911A/1912A P-Series Power Meters Programming Guide
:
1
CORR
:GAIN4
:FDOFfset
This command queries the current frequency
dependent offset being applied to Channel A.
SENSe Subsystem
:INP
:MAG
10
?
407