Trigger[:Sequence]:Level:auto <Boolean - Keysight N1911A Programming Manual

14 TRIGger Subsystem
TRIGger[:SEQuence]:LEVel:AUTO <boolean>
This command enables/disables automatic setting of the trigger level.
When this command is set to:
– ON, automatic setting of the trigger level is enabled.
– OFF, automatic setting of the trigger level is disabled.
– ONCE, automatic setting of the trigger level is enabled for one trigger event
Syntax
Example
TRIG:SEQ:LEV:AUTO 0
Reset Condition
On reset the value is set to ON.
668
only. The value is then set to OFF.
TRIG :SEQ :LEV :AUTO
This command disables the automatic
setting of the trigger level for Channel A.
N1911A/1912A P-Series Power Meters Programming Guide
Space
0|OFF
1|ON
ONCE
?