Calculate[1]|2|3|4:Limit:state <Boolean - Keysight N1911A Programming Manual

3 CALCulate Subsystem
CALCulate[1]|2|3|4:LIMit:STATe <boolean>
This command enables/disables the test limits for the specified window.
Syntax
Example
CALC2:LIM:STAT 1
Reset Condition
On reset, limit checking is disabled.
Query
CALCulate[1]|2|3|4:LIMit:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the limits
testing feature for the specified window/measurement.
– 1 is returned when limits testing is enabled
– 0 is returned when limits testing is disabled
198
CALC 1
2
3
4
N1911A/1912A P-Series Power Meters Programming Guide
:LIM :STAT
This command enables the limit checking
function for the lower window upper
measurement.
Space 0|OFF
1|ON
?