Service:bist:trigger:test - Keysight N1911A Programming Manual

SERVice:BIST:TRIGger:TEST?

This command queries trigger in and out.
– 1 is returned if the test passes
– 0 is returned if the test fails
Before running this command, the read panel trigger out must be jumpered to
NOTE
the rear panel trigger in.
Syntax
SERV
Example
SERV:BIST:TRIG:TEST?
N1911A/1912A P-Series Power Meters Programming Guide
:BIST :TRIG :TEST ?
This command queries trigger in and out.
SERVice Subsystem 15
697