Memory:table:frequency:points - Keysight N1911A Programming Manual

7 MEMory Subsystem

MEMory:TABLe:FREQuency:POINts?

This query returns the number of frequency points for the table currently selected.
The response format is <NRf>. If no frequency values have been set, this command
returns 0. If no table is selected, this command returns NAN.
Syntax
MEM
Example
MEM:TABL:FREQ:POIN?
294
:TABL :FREQ
N1911A/1912A P-Series Power Meters Programming Guide
?
:POIN
This command queries the number of
frequency points in the current table.