Keysight N1911A Programming Manual page 611

N1911A/1912A P-Series Power Meters
Programming Guide
13 TRACe Subsystem
This chapter explains how to use the TRACe command subsystem to configure and
read back the measured power trace.
TRACe Subsystem
TRACe[1]|2[:DATA]? <character_data>
TRACe[1]|2:DEFine:DURation:REFerence<numeric_value>
TRACe[1]|2:DEFine:TRANsition:REFerence <numeric_value>,
<numeric_value>
TRACe[1]|2:MEASurement:INSTant:REFerence? <numeric_value>
TRACe[1]|2:MEASurement:PULSe[1]|...|10:DCYCle?
TRACe[1]|2:MEASurement:PULSe[1]|...|10:DURation?
TRACe[1]|2:MEASurement:PULSe[1]|...|10:PERiod?
TRACe[1]|2:MEASurement:PULSe[1]|...|10:SEParation?
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:DURation?
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:OCCurrence?
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:DURation?
TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:OCCurrence?
TRACe[1]|2:MEASurement:REFerence? <numeric_value>
TRACe[1]|2:STATe <boolean>
TRACe[1]|2:UNIT <character_data>
612
614
618
634
636
616
620
621
622
624
626
628
629
630
631
632
611