10
SENSe Subsystem
SENSe[1]|2:TRACe:Y:SCALe:PDIV <numeric_value>
This command is used to set the Y Scale value (per division) for the selected trace.
The Y Scale value set by this SCPI command is dependant on the current Y-axis
unit, which can be set using SENS:TRAC:UNIT command.
This command is only applicable when N192x or E932x sensor is present and
NOTE
trigger acquisition mode is selected.
Syntax
SENS
1
2
Parameters
Item
numeric_value
462
:TRAC
:Y
Description/Defaul t
The numeric value for Y-axis scale.
N1911A/1912A P-Series Power Meters Programming Guide
:PDIV
:SCAL
numeric_value
Space
?
Range of Values
0.001 dB to10 dB
1 nWatt to10 MWatt