Questionable Status Registers
These registers record signals that indicate abnormal operation. The group
consists of the same register types as the Operation Status group. The outputs of
the Questionable Status group are logically-ORed into the QUEStionable
summary bit (3) of the Status Byte register.
Bit Definitions: Questionable Status Registers
Bit number
0 to 3 Not Used
4 OT
5 to 15 Not Used
– Once a bit is set, it remains set until cleared by reading the event register or
– The
Keysight U2722A/U2723A Programmer's Reference
Decimal value
0
16
0
the clear status (*CLS) command.
STATus:PRESet
command presets the Questionable Status registers.
Definition
0 is returned.
The over-temperature protection has tripped.
0 is returned.
command will clear all bits in the enable register. This
SCPI Status Registers
2
23